Guidance Testing & Inspection
TÜV AUSTRIA Websites > Stage TR > Solution > Endüstri > Plant Safety: Bow-Tie Solution: Plant Safety: Bow-Tie Guidance Testing & Inspection Solution: Plant Safety: Bow-Tie Dipl.-Ing. Dr. Martin Doktor Dipl.-Ing. Dr. Martin Doktor Deutschstraße 10 1230 Wien Österreich +43 5 0454 6137 E-posta gönder Deutschstraße 10 1230 Wien Österreich Paketime Kaydet Dipl.-Ing. Dr. Martin Doktor Paketime Kaydet TÜV AUSTRIA Vertrieb TÜV AUSTRIA Vertrieb Deutschstraße 10 1230 Wien +43 5 0454 1700 E-posta gönder Deutschstraße 10 1230 Wien Paketime Kaydet TÜV AUSTRIA Vertrieb Paketime Kaydet TÜV AUSTRIA GMBH TÜV AUSTRIA GMBH Region: Österreich Deutschstraße 10 1230 Wien Österreich +43 5 0454 0 E-posta gönder Deutschstraße 10 1230 Wien Österreich Paketime Kaydet TÜV AUSTRIA GMBH Paketime Kaydet Bow-Tie Bu çözüme hangi bölgede ihtiyacınız var? Avusturya Romanya Kıbrıs İsviçre Almanya Türkiye Yunanistan İspanya İtalya Belçika İngilizce Çek Cumhuriyeti Polonya Slovenya Arnavutluk Portekiz Birleşik Krallık KSA Mısır Hindistan Tüm akreditasyonlar "A qualitative risk assessment method resulting in a that combines cause and hazard (fault tree) with the consequence steps (event tree)." Bow-Tie Analysis is a structured, qualitative method for risk assessment. The result is a diagram that combines both the chain of cause and hazard (fault tree) as well as the chain of consequence steps (event tree). The fault tree on the left and the event tree on the right are connected by the associated top event (such as a product release) in the middle. The Bow-Tie diagram provides a snapshot of the cause/hazard and consequences of the main scenarios as well as control elements at the time of analysis. It also provides a snapshot of the barriers used to prevent the occurrence of the adverse event or to limit its impact. Once the examination is complete, the situation may change, for example because control measures have taken effect. Bow-Tie diagrams are created by depicting following building blocks: Hazard (example: presence of hydrocarbons) Top event due to hazard (example: product release) Causes that enable the occurrence of a top event Consequences due to the occurrence of a top event Barriers which are intended to prevent the occurrence of the top event on the causal side (preventive control barriers) Barriers intended to reduce the extent of damage once a top event has occurred (mitigative barriers) A Bow-Tie diagram should be prepared, if possible, for all Major Accident Hazards (MAHs) which are to be identified in a hazard and risk analysis if necessary. Daha Fazla Etiket: AOJ II 309/2004 Assembly evaluation Bow-Tie Cellulose Chemistry Directive 1999/92/EC Energy supplier EX Explosion safety Food Food industry Machinery Directive (2006/42/EC)Paper Petrochemistry Pharmaceuticals industry Plant safety Pressure Equipment Directive 2014/68/EU Recycling SEVESO Steel Trade Regulations Act (AOJ I 88/2000)VEXAT Waste recycling Aynı Sektördeki İlgili Çözümler: Endüstri High-voltage power lines Endüstri Daha fazla göster Koleksiyonuma Kaydet Acceptance test – pressure equipment Endüstri Daha fazla göster Koleksiyonuma Kaydet Plant safety: Subassembly evaluation Endüstri Daha fazla göster Koleksiyonuma Kaydet Augmented Reality Endüstri Daha fazla göster Koleksiyonuma Kaydet Tüm Çözümler Daha Fazla Sektör Bul: Belediyeler Bilim & Araştırma Boş Zaman & Eğlence Elektronik Enerji Gıda Maddeleri İletişim Teknolojisi İnşaat ve Emlak IT & Güvenlik Makine Otomotiv Sağlık & Tıp Sertifikasyon Spor & Fitness Sürdürülebilirlik Tarım Ticaret & Sanayi Turizm Ulaşım & Trafik Martin Doktor +43 5 0454 6137 \| martin.doktor@tuv.at
Martin Doktor +43 5 0454 6137 \| martin.doktor@tuv.at

TÜV AUSTRIA Websites > Stage TR > Solution > Endüstri > Plant Safety: Bow-Tie

Solution: Plant Safety: Bow-Tie

Guidance Testing & Inspection

Dipl.-Ing. Dr. Martin Doktor

Deutschstraße 10 1230 Wien Österreich

+43 5 0454 6137

E-posta gönder

TÜV AUSTRIA Vertrieb

Deutschstraße 10 1230 Wien

+43 5 0454 1700

E-posta gönder

TÜV AUSTRIA GMBH

Region: Österreich

Deutschstraße 10 1230 Wien Österreich

+43 5 0454 0

E-posta gönder

"A qualitative risk assessment method resulting in a that combines cause and hazard (fault tree) with the consequence steps (event tree)."

Bow-Tie Analysis is a structured, qualitative method for risk assessment. The result is a diagram that combines both the chain of cause and hazard (fault tree) as well as the chain of consequence steps (event tree). The fault tree on the left and the event tree on the right are connected by the associated top event (such as a product release) in the middle.

Ein Bow-Tie-Diagramm soll, wenn möglich, für alle Major-Accident-Hazards (MAH) erstellt werden, welche gegebenenfalls in einer Gefahren- und Risikoanalyse zu identifizieren sind.

The Bow-Tie diagram provides a snapshot of the cause/hazard and consequences of the main scenarios as well as control elements at the time of analysis. It also provides a snapshot of the barriers used to prevent the occurrence of the adverse event or to limit its impact. Once the examination is complete, the situation may change, for example because control measures have taken effect.

Bow-Tie diagrams are created by depicting following building blocks:

Hazard (example: presence of hydrocarbons)
Top event due to hazard (example: product release)
Causes that enable the occurrence of a top event
Consequences due to the occurrence of a top event
Barriers which are intended to prevent the occurrence of the top event on the causal side (preventive control barriers)
Barriers intended to reduce the extent of damage once a top event has occurred (mitigative barriers)

A Bow-Tie diagram should be prepared, if possible, for all Major Accident Hazards (MAHs) which are to be identified in a hazard and risk analysis if necessary.